Computrace is a software program that allows you to locate your computer on the internet. This software has been around since 2005 and was originally developed by Microsoft.
Computrace is a feature that allows users to disable their laptop from being stolen. However, it has been known to cause issues with the computer. This article will show you how to remove computrace from your laptop.
Since the days of security wires and padlocks, there has been a practice of preventing computer theft. Computrace will be of concern to you as a laptop owner, and understanding how to remove Computrace from a laptop will be a go-to answer for you.
Computrace is a computer module that is installed on the motherboard of a computer and transmits a GPS signal that shows its position. Activating or installing Computrace is a long-term function that improves the security of your computer. Except for those purchased with the option turned off in the PC’s primary input and output system, not every laptop comes with Computrace pre-installed.
Turn on or off Computrace entirely from the BIOS menu, but keep in mind that after you’ve changed it, you won’t be able to change it back. If you had a Computrace account, you may be able to contact them and have them deactivate it, but if you don’t, that’s a problem, and it’s probable that the function provides a wipe option if you don’t have one.
How Do I Get Computrace Off My Laptop? (Step-By-Step)
Step 1: Shut down your computer.
Turning off Computrace by pushing the “Power” button on the PC’s tower or the top keyboard bezel is the first step towards deactivating it.
Step 2: Start your computer and go to the BIOS menu.
You must now restart your computer and wait for the manufacturer’s emblem to appear on the display. When it appears, immediately click the BIOS access key that appears on the monitor to enter the BIOS menu.
The BIOS keys vary by computer manufacturer, however pressing the “DEL” or “F2” keys often brings up the BIOS menu.
Step 3: In the BIOS main menu, choose the “Security” tab.
Using the arrow keys, go to the “Security” tab on the BIOS main menu (since the computer isn’t capable of doing so). There are three possibilities for Computrace there. Almost certainly, the “Deactivated” option was chosen.
Step 4: Hit “Enter” after selecting Disable Option For Computrace.
To completely deactivate Computrace on your laptop, choose the “Disable” option and press “Enter” on your keyboard. Once the Computrace module is deactivated, you won’t be able to turn it back on.
To confirm the “Disable” option, press the “Enter” key once again.
Step 5: To save the changed settings, press the “F10” key, and your laptop will reboot into the operating system.
To save the changed settings, press the “F10” key, and the machine will reboot into your laptop’s operating system.
What Is the Best Way to Find Computrace on My Laptop?
Computrace is a tracking tool created by absolute software to assist big companies monitor their assets and retrieve stolen items. This software is currently included in the firmware of a select number of large companies, including Hewlett Packard, Dell, Panasonic, and others.
There are a few ways to finding Computrace on your laptop. The following are some of them:
- “Ctrl+Shift+Esc” is pressed. The Windows Task Manager will appear as a result of this.
- Select the “Services” option to get a list of available services. To alphabetize the services, choose “Name.”
- Then, scroll down to the bottom of the list and look for rcpnet.exe under the Name column and Computrace below it in the Description column. Computrace is pre-installed and operational on your laptop, according to the results of this search.
Another option is to look inside your laptop’s BIOS. Examine the “Security” aspect of the Computrace module interface for its current state. This interface may be found in one of the following locations:
Disable: This indicates that the Computrace Interface module on your laptop is turned off.
Non-active: This indicates that the Computrace Module Interface is present but turned off. For most vendors, this is the default setting.
The Computrace Module Interface is active if it is present and functioning.
The status setting for this interface may now be changed only once, and the configuration can no longer be reset. Owners are advised to set its status to “Active” to fully deactivate it.
If the status is already “Active” and cannot be reset, owners should contact the vendor to have the motherboard replaced. Find the following in the registry editor:
HKEY LOCAL MACHINESYSTEMCurrentControlSetControlSession Manager is found in HKEY LOCAL MACHINESYSTEMCurrentControlSetControlSession Manager. To prevent this program from starting up after turning on your system, save the BootExecute key figure before deleting it.
If the files rpcnetp.exe, rpcnet.exe, rpcnetp.dll, and rpcnet.dll are present in your system’s System32 directory, terminate the connected processes and delete these files. Keep in mind that you will not be rebooting your computer at this time.
Create the four files mentioned above using the System32 directory’s empty contents. Follow these instructions for each file: To go to the Properties page, right-click any of them and choose Properties.
After that, go to the Security tab and set Permissions for each user or group to prevent them from having complete power. You must modify the “hosts” files if you want to retain the factory BIOS settings and linked Windows configurations and data.
Does Replacing BIOS-Chips on My Laptop Remove Computrace?
No, flashing your BIOS will not get rid of Computrace. It doesn’t matter whether you erase or replace another file; Computrace remains. If your BIOS isn’t flashable, you may still update it as long as it’s contained on a PLCC or socketed DIP chip.
Following the introduction of a new motherboard model to the market, motherboard manufacturers often provide a BIOS upgrading service for a limited period. There are four stages to changing your BIOS chip. These procedures will transfer the firmware to the hard drive’s PCB:
Disconnect the circuit boards and access the hard disk using screwdrivers.
Using a hot-air gun, remove the BIOS chips from both the original and replacement boards.
Solder the BIOS chip from the original PCB to the new HDD PCB.
The system clock on your BIOS chip will reset if it is malfunctioning. The BIOS chip in your laptop keeps track of the time and date that Computrace was installed. You’ll also notice unexplained POST problems followed by inability to access POST.
FAQs
What is a BIOS chip and what does it do?
The BIOS (pronounced bye-oss) is an acronym for Basic Input/Output System, which is a ROM chip found on motherboards that allows users to access and customize their personal computer at the most basic level.
Is Computrace a trustworthy app?
Yes, of course. Unless you have hardware knowledge of BIOS change inspection and monitoring, Computrace seems to be a reliable backdoor. Any large company or a smart computer geek may alter the files and acquire full control of your system, including the ability to delete files and monitor everything you do.
Is it necessary to activate Computrace?
Assume you activate your Computrace license, which adds an additional layer of protection. You’re just buying a machine with a botnet in BIOS if you discover a model with the software but the license belongs to someone else.
Should I turn off Computrace for good?
If a Windows operating system with Computrace is installed on the computer, Computrace is likely to enable and activate itself. Computrace is destroyed for life if it is fully deactivated, which you should test if it is beneficial for you.
How Do I Uninstall Computrace on My Dell Laptop?
To turn off Computrace on your laptop, turn it on and use the F2 key to enter the BIOS. Scroll to the security screen as soon as you enter the BIOS. You’ll learn how to uninstall Computrace.
The disable option allows you to enable or disable the Optional Computrace app’s BIOS module interface. Disabled, Deactivate, and Activate are the options.
Conclusion
Even if figuring out “How to deactivate Computrace on your laptop” may seem to be a difficult task, you should make every effort to make it a reality. You will undoubtedly discover a solution if you follow the procedures outlined above and explore every other alternative.
The information provided above applies to both Dell and non-Dell computer users.
I hope that I was able to assist you with the inquiry “How To Remove Computrace From a Laptop” throughout this blog article; if you still have any questions, please let me know in the comments and I will do my best to assist you.
Computrace is a tool that allows you to remotely log into your computer. It is a useful tool for some people, but some may not want it on their computer. This article will go over how to disable computrace on a laptop. Reference: should i disable computrace.
Frequently Asked Questions
How do I remove Computrace LoJack from my laptop?
LoJack is a computer security software that allows you to remotely locate your laptop if its lost or stolen, and it can be removed by following the instructions on this page.
Should I permanently disable Computrace?
Yes. Computrace is a malicious software that can cause your computer to be infected with malware and spyware, which can lead to identity theft.
What is Computrace in BIOS?
Computrace is a feature in BIOS that allows the computer to be tracked and followed by a remote location. This can be used for things like tracking a laptop if it is stolen, or locating a computer if it has been lost.
Related Tags
- hp computrace disable
- computrace dell deactivate
- computrace removal tools
- how to uninstall lojack
- thinkpad computrace
